[ gravity-slaves ] forum

MARKETPLACE => wanted => : PoRkY1 2 Apr 11, 20:20

: Wanted, 160mm IS to Post adapters.
: PoRkY1 2 Apr 11, 20:20
Hey guys,

Its been a while, and i'm throwing together a bike after a couple of years out of the saddle.

I have a set of LX disc brakes which are post mount, but both my frame and forks are IS, so if anyone has a pair of adapters that would be grand, I've trid the local shops and they are either out of stock or extortionate.

Cheers, Joe
: Re: Wanted, 160mm IS to Post adapters.
: Phil 3 Apr 11, 21:59
I think I might have a new one.

It's not marked with anything so I'll post a photo to make sure it's what you are after.
: Re: Wanted, 160mm IS to Post adapters.
: Phil 3 Apr 11, 22:07
Photo attached - IS frame to Shimano post mount caliper.

Just checked against the frame and it's the same as the 160mm rear.

The same IS to post mount is 180mm on the front or 160mm on the rear - so this would do 160mm rear.

Drop me a mail to phil at gravity-slaves.co.uk if it's of interest.